Serenity - June 21 2007
So there is this hobby tubing in Aluminum and Brass that is the perfect diameter for the larger piping. The problem is any tubing that you try and bend will most likely kink. To prevent this I use the first wire (lucky coincidence) and I put it in the tubing. This prevents the dreaded kinking. I leave a bit extended as a glue point
The top piece is bent to shape. The easy part. The hard part is trying to make a copy of the first part. My second attempt (below) does not go well.
At this point I decide that I will not add all the piping and that is it for this model. Not 100% complete but I can add it all for the next one.