Serenity - July 19 2006
Moulds all cured and now ready to cast
Back to this little engine detail. Small strips glued to the outside to create a lip. This will be trimmed back
And this is the mould box for the little detail piece
First casting. It s a bit thick but I can work with it
Close up of the casting
All cleaned up
Another engine detail piece. These are the parts. A punch and die set is helpful for making the small circles
And all glued together. The hole are where piping will go into
Rod glued to the back end of the antenna arrays
First one installed
Front view
another side view
The mount made of brass rod
And with the antenna array on