Serenity - June 27 2006

06271.jpg
06271.jpg

So this is the area that I found detail was lacking on my model and I had to add. Here I am making a template

06272.jpg
06272.jpg

Close up. The little blue ticks were me figuring out the spacing for the area

06273.jpg
06273.jpg

The template beside the parts that will need to be shaped

06274.jpg
06274.jpg

But first I flip the thing over and press against some 600 grit sandpaper to make sure the ends are entirely even.

06275.jpg
06275.jpg

making a mould of the engine exhausts Not really needed since I had made 2 exhausts out of the parts but I thought a one piece item would be stronger.