Serenity June 14, 2006
Finally found my old egg mould and am casting the very end. I will be mounting the parts to it so it can be a complete assembly that I plan to cast
More casting
4 good small bells. Each were individually sanded but tiny differences were not noticeable until all 4 were lines up side by side. They can be out by only a thou but here is where it will stick out like a sore thumb
So I used double sided tape and I taped them all down. I then came in the back with a file to try and get them all at the same height. Tested the level with a small piece of sheet styrene placed on top.
The pieces just loosely put in place to show what I am trying to achieve as a finished assembly
Another view