Serenity - June 7 2006
Sanding, filing and test fitting of the rear fin to get the correct fit. Also the last 3 rows of fins were super glued down at the edges for extra strength.
When the glue was dry the excess was cleaned up
Whow back to the body and the installation of the grill.
Minor gap issued that will need to be filled. Had to be careful when gluing this in as I didn't want to fill the fine grill work with glue
Also more sanding from the puttying done a while ago
Yup lots O sanding
Now to start the back engine detail. Start with sheet styrene, a marker, tape and references. Mark a bunch of lines and hope they are right. Cut along those lines
Tada. The start of another part
Another view