Serenity - May 17 2006
The edges are a bit rough with CA glue filler
I am going to use this primer brushed on to check the finish of the edges I am working on
Grey is a good colour to highlight errors that I can then fix. I do not do it all over or else I would build up layers and layers of primer and it will soften the detail. When it is almost done i will spray a layer of grey primer so I can check all the little errors. But in this location I can brush on some primer to pick out area that need to be fixed
The edge is looking good. It is mostly even and smooth
The other side
The edge is very rough and uneven
Filler time
hard another round of filler
Different angle. The light reflections help show where the filler was used
All sanded smooth
Several coats of the primer was used during this process to ge teh finish I wanted