Serenity - May 9 2006
Some vertical slats added
And the other side
Little break in this thinned section so I filled it in with super glue. A couple of applications to build it up and then carving and filing to shape. Not always easy to do since the CA glue is harder then the surrounding area so there is a danger of sanding more of teh surrounding area away.
Below view. The CA stuff is the greyish colour
Um the other side also needed to be fixed
The blob of CA glue is the start
and I am looking at the rear motor section and starting to mark out where I am cutting out. I looked for my Tamiya tape (the yellow) stuff to make the lines but I could not find it (grrr)