SERENITY - Jan 28 2006 |
This is the start of the small type vent at the very top of the head. Two angled slats |
Glued to the base and the end piece above it. Below is a strip that will be used for the sides |
Roughly glued together. I will let it dry thoroughly before filing it to shape |
Finish of the aluminum and cutting a new vent area that I forgot about. Well I didn't forget. I remember seeing it but missed including it when I was working on the white styrene parts. |
White styrene strips at the very top too. I was worried that trying to scribe or cut the thin width styrene may distort it but it turned out OK |
Overall view |
So I went to a blockbusters and I purchased a couple of previously viewed DVDs of Serenity. I plan to lent these out to co-workers and such and get them hooked to the verse. |
|