 09241.jpg Bottom mould of the flap done now it is time ot make the second part. The plastercine used on the bottom part has to be cleaned out and mould release added to make sure the mould do not stick together once it is cured |
|
 09242.jpg Puttying to the rear wing |
|
 09243.jpg |
|
 09244.jpg |
|
 09245.jpg Stabilizer tabs on the engine are ready to be installed |
|
 09246.jpg Instead of gluing them to the surface and they being fragile I decided to make the tabs bigger so part of it can be in the body. Here are the cutouts done using a dremel tool |
|
 09247.jpg |
|
 09248.jpg The tabs are not Super glued glued in |
|
 09249.jpg Close up |