SERENTY - Aug 1 2005 |
||
Making the mould for the rear engine area. After casting I will detail the cast part. I do not want to do it to this part in case I screw up |
The mould for the side engine parts |
|
A look inside of the engine end |
A look inside of the side engines |
|
Chopping out the other side |
Lots of grinding and test fitting |
|
More work on the shuttle. I will make one and make a casting so i can have 2 |
RTV poured and now waiting for it to cure. Cure time is supposed to be 24 hours but I will wait a week to ensure the RTV is completely cured. |
|