R7 Skin Extras - R7 Eye
The eye is made up of several section and does not have the dome curve cut out of it due to the vareious dome shapes.  The builder will have to cut the sides to fit their dome.  This is best done by constantly test fitting th eeye to the dome
0901.jpg
0901.jpg

Here are al the parts ready to go  I started with the angles pieces.  To increase the gluing aera I slightly files the edges of the mating surfaces.  After the angle piecs were glued together the face was glued to the angled pieces.  Once hts was done the rectangular pieces were glued
0902.jpg
0902.jpg

Here is tjhe finished eye all ready to be mounted to the dome
0903.jpg
0903.jpg

Here is the undertide of the eye